Digital Equipment DEC 3000 600 AXP, Информация о сервисе

Страница: 299 / 461

Installation Procedure
• 12 clip nuts (PN 90–07786–00)
• Bottom air deflector assembly (assembled in the previous
section)
Install the bottom air deflector assembly (Figure 12–3) as follows:
Steps Action
1 Attach one clip nut to each tab
#
on the deflector, as
shown in Figure 12–3.
2 Count up two holes from the bottom of the
installation area on the front and rear cabinet rails.
3 Use the four 10/32 screws to secure the bottom air
deflector assembly to the cabinet rails.
4 Install clip nuts in holes 6, 10, 12, and 18 on the
front cabinet rails. Install clip nuts in holes 6, 10, 20,
and 23 on the rear cabinet rails. See Figure 12–1.
Assemble the
Right Side
Chassis Slide
Subassembly Required materials:
• Eight 8/32 screws
• Eight nuts
• Two slide mounting brackets (PN 74–46197–01)
• Chassis slide (PN 12–18166–02)
• Slide mounting angle brace (PN 74–45548–02)
Note
The slide mounting brackets have two mounting ends.
One end is for IEC mounting, and the other is for metric
mounting. See Figure 12–4.
Assemble the right side chassis slide subassembly (Figure 12–4)
as follows:
12–7