manualshive.com logo in svg

Digital Electronics GP-377 Series, Руководство пользователя

Поделиться
Скачать
Digital Electronics GP-377 Series Скачать руководство пользователя страница 83

Chapter 6 - GP RUN Mode and Errors

GP-377  Series Users Manual

6-11

DISPLAY PATTERN

Used when the buzzer will not sound and when the device contents will not
display correctly to check the drawing function. It does this by running checks on
the various screen pattern displays (8 screens), the ON/OFF Display, and
KANJIROM CHECKSUM.  When the ON/OFF Display is checked, the Buzzer
ON/OFF check is run simultaneously.  If KANJIROM CHECKSUM is normal,

OK 

displays; if there is a problem, 

NG 

displays.

TOUCH PANEL

Touch Panel check.  Checks if each touch cell highlights when pressed.

INPUT PORT

Used only for Digital's maintenance.

INTERNAL FEPROM CHECKSUM (System & Protocol)

The Internal FEPROM

*1

 System and Protocol check searches for any problems

that may arise during operations.  When running the check, the screen will change
as follows.

When the FEPROM is normal, 

OK

 displays; if there is a problem, the screen stops

in the middle of operation.  This check does not erase the System or Protocol.

FRAME BUFFER

The Frame Buffer (display memory) Check looks for any display problems that
may develop.  When everything is normal, 

OK 

displays; when there is a problem,

an error message displays.

This section explains the contents of SELF-DIAGNOSIS.  For information on
how to operate the Screen, 

 Chapter 4, "OFFLINE Mode"; 

for

information about how to set up the Special Tools,

  

 Chapter 3,

"Installation and Wiring".

6.3.2  SELF-DIAGNOSIS  -  Details

*1

Also known as "FEEPROM" (Flash Electronic Erasable Programmable Read Only

Memory).

Содержание GP-377 Series





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды