manualshive.com logo in svg

Digital Electronics GP-377 Series, Руководство пользователя

Поделиться
Скачать
Digital Electronics GP-377 Series Скачать руководство пользователя страница 5

v

GP-377 Series User Guide

Preface

This manual includes procedures that must be followed to operate the GP cor-
rectly and safely. Be sure to read this manual and any related materials thoroughly
to understand the correct operation and functions of this unit.

Usage of Icons

Throughout this manual the following icons are provided next to GP operation
procedures requiring special attention. and provide essential safety information.
The following is an example of these icons and their meanings:

Indicates situations where severe bodily

injury, death or major equipment damage

can occur.
Indicates situations where slight bodily

injury or machine damage can occur.

System Design
• Do not create switches used to control machine safety

operations, such as an emergency stop switch, as a GP

touch screen icon. Be sure to install these switches as

separate hardware switches, otherwise severe bodily

injury or equipment damage can occur.

•  Please design your system so that equipment will not

malfunction due to a communication fault between the GP

and its host controller. This is to prevent any possibility of

bodily injury or material damage.

Essential Safety Precautions

Warning

WARNINGS

Caution

•

The GP is not appropriate for use with aircraft control

devices, aerospace equipment, central trunk data trans-

mission (communication) devices, nuclear power control

devices, or medical life support equipment, due to these

devices’ inherent requirements of extremely high levels of

safety and reliability.

•

When using the GP with transportation vehicles (trains,

cars and ships), disaster and crime prevention devices,

various types of safety equipment, non-life support re-

lated medical devices, etc. redundant and/or failsafe sys-

tem designs should be used to ensure the proper degree

of reliability and safety.

Содержание GP-377 Series





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды