PS-2000B Series User
Manual
3-1
1) Connect a keyboard to the PS-B.
2) Turn the PS-B's power ON.
3) After the message "Press <F2> to Enter SETUP" appears, press the [F2]
key until the following screen appears.
The following settings are those pre-set at the factory.
Normally, use only the factory (default) settings.
3.1 Setup Procedures
3.2 System Parameters
This chapter explains how to enter the PS-2000B Series Unit's system settings, as well
as the cautions required both before and during set up.
KEYBOARD ACTION KEYS
Provides a summary of the keyboard keys used to carry out the set up.
SYSTEM SETTING SELECTION AREA
Each of the titles (areas) listed here contains system setting items.
4) Use the arrow keys to move the cursor to the desired selection.
Note:
Esc: Quit
↑↓→←
: Select Item
F10 : Save & Exit Setup
Time,Date,Hard Disk Type...
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
Syetem Monitor Setup
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Chapter
3 System Setup
3.1
Setup Procedures