manualshive.com logo in svg

Digital Electronics Corporation Pro-face PS-2000B-41, Руководство пользователя, Страница: 67 / 105

Поделиться
Скачать
Digital Electronics Corporation Pro-face PS-2000B-41 Скачать руководство пользователя страница 67

Chapter 4 – Setting up Your PS-B Unit

PS-2000B Series User Manual

4–2

4.2

Setting up Your PS-B Unit

There are two types of PS-B units. One has a hard disk with no pre-installed OS
and one has a hard disk with a pre-installed OS. Therefore, the setup procedures
used will differ. This manual describes only the procedures for setting up a PS-B
unit using a hard disk with no pre-installed OS.

For an explanation of how to set up a PS-B using a hard disk with a pre-installed OS, refer to
the "Pre-installed Type Installation Guide", provided with the HDD unit.

4.2.1 Setup Procedures

First, you will need to install either Windows

®

2000 or Windows

®

XP. You also

need to install any required utility software.

„

„

„

„

„

Installing the HDD Unit

Check to see if a hard disk unit is installed in your PS-B unit. If it is not, please
install one prior to going to the next step.

PSB-HD020 Installation guide

„

„

„

„

„

Setting Up HDD Unit System Information

After you install your HDD unit, you will need set up a variety of system informa-
tion. Set up this information so that the system recognizes the newly-installed hard
disk drive.

PSB-HD020 Installation guide

„

„

„

„

„

Setting Up the OS

Install your operating system. For detailed setup procedures, refer to that product's
installation manual.

The PS-B unit supports Windows

®

2000 and Windows

®

XP. PS-B unit perfor-

mance cannot be guaranteed when any other operating system is used.

„

„

„

„

„

PS-B Utility Setup

Install the necessary drivers and utility software from the "PS-2000B Series User
Manual & Driver CD".

•

A PS/2 (mini-DIN) type keyboard is required to install the
OS.

•

When using a touch panel display with the PS-B, the touch
panel will require an optional mouse emulation software
(UPDD). When installing the mouse emulation software, be
sure to specify the number of the serial cable's COM port.
Visit our website (http://www.pro-face.com/otasuke/) and
download the mouse emulation software (UPDD).

Содержание Pro-face PS-2000B-41










































































































Отзывы:

Нет отзывов