Digital Electronics Corporation Pro-face PS-2000B-41 Скачать руководство пользователя страница 71

Страница: 71 / 105

Chapter 4 – Setting up Your PS-B Unit

PS-2000B Series User Manual

4–6

4.3

Installing Drivers

Three types of dedicated PS-B drivers (Audio, Chipset, and graphic accelerator)
are available.

Install the required drivers from this data when using a PS-B with no pre-installed
OS or when the system recovery has been performed via the recovery menu.

This explanation given in this section assume that the [Proface] folder has been
created.

Once drivers are installed in the PS-B unit, they cannot be uninstalled.

Installing the Audio Driver

Installing the Audio driver enables the OS’ Audio feature.

(1) Double-click on the "Setup.exe" file located in the following folder. Follow

the instructions given to install the driver.

C:\Proface\Audio\Setup.exe

Installing the Chipset Driver

Installing the Chipset driver adds the Chipset feature to the OS.

(1) Double-click on the "infinst_autol.exe" file located in the following folder.

Follow the instructions given to install the driver.

C:\Proface\Chipset\infinst_autol.exe

Installing the Graphic Accelerator Driver

Installing the Graphic Accelerator Driver will accelerate the screen refresh speed,
using special hardware features.

(1) Start "C:\Proface\Display\Win2K_xpm67.exe" file.

(2) Select [Next]-[Yes]-[Exit], and then restart the system to complete the instal-

lation.

Содержание Pro-face PS-2000B-41










































































































Результаты поиска

Содержание Pro-face PS-2000B-41

Отзывы:

Digital Electronics Corporation Pro-face PS-2000B-41, Руководство пользователя, Страница: 71 / 105

Результаты поиска

Содержание Pro-face PS-2000B-41

Отзывы: