manualshive.com logo in svg

DIGITAL DELAY Mega 475, Инструкция по эксплуатации

Поделиться
Скачать
DIGITAL DELAY Mega 475 Скачать руководство пользователя страница 41

- 41 - 

pressed and released the Shift will toggle between either an 
RPM or a Time shift.  On line two, as the Shift is toggled 
between RPM and Time, the text TIME and a decimal will 
be shown for a Time shift or the text RPM for an RPM shift. 
 
Changing the Shift Points 
 

After making sure the correct Shift Number and Shift 

Mode has been selected, the Shift Point can be adjusted in 
three ways. 
 

The first way is using the 

 or 

 key.  To use the 

 or 

 key to adjust the Shift Point, the selection arrows must first 

be on line 2.  Then use either the Up arrow key, to scroll up, 
or the Down arrow key to scroll down. 
 

The second way to change the Shift Point is by using 

the Clear key while the selection arrows are on line 2.  Press 
and release the Clear key, the display line 2 will go blank 
indicating the unit is ready to accept the new Shift Point.  
Now using numerical keys enter the new Shift Point, leading 
zeros do not have to be entered.  For example if a time of 
2.35 for a Shift Point was desired 235 would be entered on 
the keypad.  If less than four digits are entered for a Shift 
Point, pressing the Next key will act as an enter key and the 
leading zeros will be displayed on the LCD.   As the 
numbers are entered they are shown on the display, 
indicating the numbers are accepted and entered into 
memory.  If a mistake is made while entering the Shift Point, 
press and release the Clear key and re-enter the Shift Point 
again. 
 

The last way to change the Shift Point is by using the 

Clear key while the selection arrows are on line 4.  The only 
difference in using the Clear key from line 4 as opposed to 
line 2 is that when the Clear key is pressed and released the 
selection arrows will be displayed on both line 2 and line 4.  
This is to indicate that line 2 is being updated from line 4.  
 
 

Содержание Mega 475



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды