DIGITAL DELAY Mega 475, Инструкция по эксплуатации

Страница: 27 / 66

- 27 -
Understanding the
Special Functions Screen 1
Tap Amount
The Tap amount is shown by right two digits on the
top line. This value will be used for both the Tap Up amount
and the Tap Down amount. Any number from .000 to .099
can be used for the Tap amount. The Tap amount only
effects the first delay started.
Tap Count
The Tap Count is shown by the left digit on the top
line. The count is used to show how many times the Tap Up,
Tap Down, or a combination of the Tap push-buttons were
pressed. The next digit on the top line will either be blank
(up) or show a minus sign (down) to indicate if the Tap
Amount was added or subtracted from the first delay started.
Because you can Tap Up and Down in a single pass
and the Tap amount is the same for both, the Tap count will
show a sum of the Taps. Example if the Tap Amount is 07
and the Tap Up button was pressed once (+1) and the Tap
Down button was pressed twice (-2) the sum is -1. This
would be shown on the screen as 1-07 indicating that the
result was one Tap Down and .007 was subtracted from the
delay time.
The Tap Count is stored until the next time the
Transbrake is used. If neither the Tap Up or Tap Down
buttons are used during a pass the Tap Count will be zero.
Tap Up
The Tap Up feature is used to keep from red lighting
if you released the Transbrake push-button too early. The
Tap Amount shows the amount of time that will be added
each time the Tap Up button is pressed. The push-button