Digifly VI100, Руководство пользователя

Страница: 18 / 32

3.10 Required glide
This is the value we see when we have the GPS connected and a waypoint set up. If
this is the case, we can see the required glide value in the fifth numeric element on
the display (E--.-), shown with one decimal place. This is the optimum glide value
needed to arrive at the
Is a powerful function that indicates the estimated arrival height over the next
waypoint (GOTO value) according to: Altimeter A1, Distance to Wp, Wp Altitude,
Height by Distance on Wp and Average Glide Ratio.
Is displayed on the fourth display from the top of the screen when the goto icon
appears.
If this data is not available because erroneously programmed on the Gps, the
VL100 uses, as alternative value, the altitude value stored in the param. 38 qnhw
waypoint. If you have set up parameter 37, safety
height over the waypoint, the required glide value takes this unto account. Since
we can see the wind efficiency on the fourth numeric value, it’s easy to compare
the actual efficiency with the required efficiency and adjust our speed to get them
as close to each other as possible. To display this value on the multifunction
display, press
or
Press key to select effic / goto
hwp
3.11 Final Glide Computer (GoTo)
blinking = received data not valid, off
= no received data.
To obtain the goto indication is necessary to program on the Gps a route to a
waypoint (the waypoint name must include the Waypoint Altitude) and to set up
the Height By Distance On Waypoint parameter.
Waypoint Altitude (altitude on the sea level of the waypoint)
This information come s from the Gps that must be programmed from the pilot so
that the name of the waypoint includes also its altitude above sea level. The format
is: aaaNNN:
aaa = 3 alphanumeric characters with the name of the waypoint.
nnn = altitude above sea level in tens of meters (or ft x10).
Es: MIL157 indicates that the waypoint MIL has the altitude above sea level =
1570 mt.
. When you disconnect the GPS, this value shows as dashes to
indicate that the value is no longer valid.
display (then gps-goto is activated).
The state of operation of the external Gps is displayed at the bottom of the screen
with the gps icon: on = received data valid,
Pag.16
GO TO