Digifly VI100, Руководство пользователя

Страница: 24 / 32

menu, and press or suntil you see the NAV submenu. Press , and the
parameter list will appear, press or to select 1 SPMO. Press , and the symbol
on the top right of display will start to flash. Press or
(da 0 a 3), and press to memorize. To return to the initial display, press twice.
To change to radius of the start pylon, use a long pressure on which will take you
to the menu, and press or , to go to the
parameter list and press or 2 SPRA. Press , the symbol on the top
right of the display will start to flash. Press or (from
100 to 30000 metres), then press to memorize. To return to the initial display,
press twice.
The distance shown on the multifunction display will be equal to the distance from
the perimeter of the start gate cylinder.
6. visualise on the Vl100 the waypoint name by a shortly pressure key, to
Start Pylon type SP1 (SPMO = 1 )
–
7. activate tompensation theme on GPS
8. take off.
WP take off as centre of Start Pylon cylinder
The GPS must give the waypoint of take off to the VL100 (as defined by
competition organisation) such that the take off coordinate will be considered as
the centre of the Start Pylon. VL100 will manages the navigation from the launch
to the Start Pylon waypoint for a given radius as defined by the pre-set value in par.
n. 2 SPRA of NAV submenu.
check
the correct receiving of the waypoint take off
Example of procedure to initialise SP1 navigation:
1. do this before take off
2. switch on VL100 and check the start in NAV submenu for SPRA and SPMO
parameters
3. make sure that VL100 doesn’t have any waypoint kept in memory (waypoint
name memory = NOWP), on the contrary it must be cancelled (see waypoint
cancellation)
4. switch on and activate the GPS with GOTO the take off waypoint (NOT IN
ROUTE MODE)
5. wait for the lighting of the VL100 direction indicator’s arrows
Start Pylon Sp1 Navigation
to select the desired value,
to enter the NAV submenu. Press
to select
to select the desired value
Pag.22
WP
TAKE OFF
SPRA
5000 m
start
point
waypoint
name
take off
waiting
zone
fixed
hang-glide
blinking
hang-glide