DigiDesign Mbox 2, Начало работы

Страница: 60 / 90

Mbox 2 Getting Started Guide 54
To adjust input levels on Mbox 2:
1
Play the instrument or sound source at the
volume you will record.
2
Using the Gain controls on Mbox 2, increase
or decrease gain until you are able to achieve
maximum levels without clipping.
To adjust the monitoring balance on Mbox 2:
■
Using the Mix controls on the front of the
Mbox 2, do one of the following:
• To hear only the input signal, turn the Mix
control fully left to Input.
• To hear an equal mix of playback and input
signals, turn the Mix control to the center.
Recording an Audio Track
To record an audio track:
1
Assign the input for a track and set its input
levels.
2
Click the Track Record Enable button.
3
Choose Window > Transport to display the
Transport window.
4
Click Return To Zero to start recording from
the beginning of the session. You can also record
to a selection in a track, or from the cursor loca-
tion in the Edit window.
5
Click Record Enable in the Transport window
to enable recording.
6
Click Play or press the Spacebar to record on
all record-enabled tracks.
7
Record your performance.
8
Click Stop in the Transport window or press
the Spacebar when you are finished recording.
To play back a recorded track:
1
Click the track’s Record Enable button a sec-
ond time to take it out of Record mode.
2
On the front of the Mbox 2, turn the Mix con-
trol fully right to Playback.
3
Click Play in the Transport window or press
the Spacebar to start playback.
4
Click Stop in the Transport window or press
the Spacebar to stop playback.
Record enabling a track in the Mix window
Transport window (Expanded view shown)
Fast Forward
Record Enable
Go to End Play
Stop
Rewind
Return to Zero
Online