DigiDesign ADAT Bridge I/O, Руководство пользователя

Страница: 54 / 68

ADAT Bridge I/O 50
6
In the Pro Tools Session Setup window,
set the Pro Tools Sync Mode to Internal.
7
Use the Output Selector of each Pro Tools
track to assign its output.
• If you are using an ADAT Bridge I/O as
your master Pro Tools interface,
Pro Tools channel 1–8 outputs corre-
spond to Group A optical outputs (1-8)
and channel outputs 9–16 correspond to
Group B optical outputs (9–16).
• If your ADAT Bridge I/O is not your mas-
ter Pro Tools interface, you must use the
output selector to choose the inputs for
each destination track according to how
your Audio Interfaces are ordered.
8
Set the Pro Tools pre-roll time to at least
10 seconds.
9
Click the Pro Tools Play button.
10
At the point at which you want to begin
recording on the ADAT, press the ADAT’s
Record and Play buttons.
11
When you have finished recording,
click the Pro Tools Stop button.