9.1
SNM15
Typical Applications
Digicom SpA
TYPICAL APPLICATIONS
INTRODUCTION
A few examples of how to use the modem are given in this section
of the manual. The programs given are related to general
applications and start from the default programming of the
modem.
Please remember that the default programming can be loaded in
two ways, either via command AT&F or by resetting the hardware
of the modem (see paragraph 3.1.5).
ASYNCHRONOUS CONNECTION
WITHOUT AUTO ANSWER FEATURE
The default programming allows you to make a phone call in
compliance with the V.21, V.22 or V.22bis standards without
needing to set any parameters of the modem with the exception
of the command for selecting the telephone number. In fact the
modem is able to automatically adapt itself to the speed both from
the line and the interface side.
You only need to key in the number you wish to call preceded by
the command ATDn (n=number to be called) to make an automatic
call.
EXAMPLE
: ATD363122 <CR> (<CR> = ENTER indicates the
command has been sent, it is a key available on any keyboard).
