Configure XLR PRO with Device Cloud
XLR PRO Radio Frequency (RF) Modem User Guide
92
Configure IP Socket Mode options
The IP Socket Mode options determine how data is transmitted from the external Ethernet port to the XLR radio. To
change IP to XLR options:
1
Click
Device Management > Devices
.
2
Double-click on the XLR PRO you need to configure.
3
Click
Configuration > IP Socket Mode
.
4
Set IP Socket Mode options:
Baud rate:
Select the baud rate for IP to XLR traffic. The default is 460800.
IP Protocol:
Select the IP protocol to use:
TCP
or
UDP
. The default is TCP.
Destination IP address:
Enter the IPv4 destination address. The default is 0.0.0.0.
Local Port:
Enter the listening IP port number for UDP and TCP operations. The default is 9750.
Remote Port:
Enter the destination IP port number for UDP and TCP operations. The default is 9750.
TCP Client timeout:
Enter the number of seconds the TCP client socket should remain open without any traffic.
The default is 60 seconds.
TCP Server timeout:
Enter the number of seconds the TCP server socket should remain open without any traffic.
The default is 60 seconds.
IP Socket Mode:
Socket mode is enabled or disabled depending on what cables are plugged in to the XLR PRO. To
prevent socket mode regardless of cables, select
Disabled
.
5
Apply the configuration changes:
If the XLR PRO is currently connected to Device Cloud, click
Save
to immediately apply configuration settings.
If the XLR PRO is currently not connected to Device Cloud, use the Schedule option to schedule when to apply
configuration changes to the device. See