XLR PRO documentation
XLR PRO Radio Frequency (RF) Modem User Guide
12
To restore factory default settings:
1
Hold down the
Reset
button for about eight seconds. While you are holding down the reset button, the serial data
in and serial data out LEDs flash three times to indicate that five seconds have passed. Continue to hold down the
Reset
button until the serial data in and serial data out LEDs flash six times.
2
Release the
Reset
button. The XLR PRO is restored to factory default settings.
Antenna port
The antenna port is a 50 ohm RF signal connector for connecting to an external antenna. The connector type is
Reverse Polarity TNC (RPTNC) female. The connector has threads on the outside of a barrel and a male center
conductor.
XLR PRO documentation
XLR PRO Radio Frequency (RF) family of products includes the following publications:
Title
Part
Number
Description
XLR PRO Radio Frequency (RF)
Module User Guide
90001407
Provides complete information on all XLR PRO Radio
Frequency (RF) Module features; describes how to configure
XLR PROs using XCTU; provides reference information on all
supported AT commands and API frames.
XLR PRO Radio Frequency (RF)
Modem Quick Start Guide
90002204
Provides a brief summary of the XLR PRO Radio Frequency
(RF) Modem kit.
XLR PRO Radio Frequency (RF)
Modem Getting Started Guide
90002203
Provides step-by-step instructions for setting up a pair of
XLR PROs to test over-the-air communications between the
radios.
XLR PRO Radio Frequency (RF)
Modem User Guide
90002202
Provides complete information on all XLR PRO Radio
Frequency (RF) Modem features; describes how to configure
XLR PROs using XCTU, the Web configuration interface, and
Device Cloud; provides reference information on all
supported AT commands and API frames.