Configure XLR PRO with Device Cloud
XLR PRO Radio Frequency (RF) Modem User Guide
90
Configure Ethernet network options
By default, the XLR PRO is configured to use DHCP addressing. To change the IP addressing options:
1
Click
Device Management > Devices
.
2
Double-click on the XLR PRO you need to configure.
3
Click
Configuration > Ethernet Network
.
4
Use static or dynamic addressing:
To use a static address, enable
Use static address
.
To obtain an IP address automatically using DHCP, disable
Use static address
.
5
For static addressing only, enter the following:
IP address:
Enter an IP address to assign to the XLR PRO in IPv4 format.
Subnet Mask:
Enter the subnet mask to use for the XLR PRO in IPv4 format.
Default Gateway:
Enter the default gateway for the XLR PRO in IPv4 format.
6
For static or DHCP addressing, you can specify the Domain Name Server address:
DNS Address:
For DHCP addressing, enter a specific DNS address to override the DNS address learned from the
DHCP server; for static addressing, enter the DNS address to use. Enter the address in IPv4 format.
Note
The default DNS address is 0.0.0.0. If you use the default DNS address and static mode is configured,
OpenDns
servers are used.
7
Apply the configuration changes:
If the XLR PRO is currently connected to Device Cloud, click
Save
to immediately apply configuration settings.
If the XLR PRO is currently not connected to Device Cloud, use the Schedule option to schedule when to apply
configuration changes to the device. See