FCC (United States) certification
XLR PRO Radio Frequency (RF) Modem User Guide
100
WARNING!
Explosion hazard—The area must be known to be non-hazardous before servicing/replacing the unit
and before installing the unit.
Cet équipement est adapté à une utilisation en Classe I, Division 2, Groupes A, B, C et D ou non dangereux
uniquement.
Ces dispositifs sont des dispositifs de type ouvert qui doivent être installés dans un boîtier adapté à l'environnement
et accessible seulement par l'intermédiaire d'un outil.
AVERTISSEMENT!
RISQUE D'EXPLOSION—Ne pas débrancher l'équipement que l'alimentation est
coupée ou que la zone est connue pour être non dangereux.
AVERTISSEMENT!
RISQUE D'EXPLOSION—Remplacement de tous les composants peut altérer l'aptitude
de Classe I, Division 2.
AVERTISSEMENT!
RISQUE D'EXPLOSION—La zone doit être reconnu comme non dangereux avant
l'entretien / remplacement de l'unité et avant l'installation.
FCC (United States) certification
FCC Part 15 Class B
Radio Frequency Interface (RFI) (FCC 15.105)
This device has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 Subpart
B of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Labeling requirements (FCC 15.19)
This device complies with Part 15 of FCC rules. Operation is subject to the following two
conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Modifications (FCC 15.21)
Changes or modifications to this equipment not expressly approved by Digi may void the user’s authority to operate
this equipment.