Digi TransPort WR11, Руководство пользователя

Страница: 656 / 866

Configure system settings General system parameters
Digi TransPort WR Routers User Guide 656
Web / command line interface
The router can be configured using several different methods. This section describes how to
configure the web GUI and CLI (command line interface) options.
Automatically log user out if idle for h hours m minutes s seconds
To limit the probability of unauthorized users gaining access to the router, login timeouts are
applied. These timeouts cause an existing connection to be closed after a predefined period. The
default is 20 minutes.
For users connected on the local Async port
Use access level None, Low, Med, High, Super
For security purposes, logging into the router is controlled by a user access level. This parameter
controls the access level that applies when logging in via the local asynchronous serial port.
Automatically log user out Never / If idle for h hrs m mins s secs
How long the local port allows access before terminating the connection and requiring the user
to log in again. Selecting the Never buttons allows permanent access to the router via the local
asynchronous serial port. If, for security reasons, it is required that the access should be limited,
the appropriate time period can be entered into the text entry boxes.
Disable Remote command echo for Telnet sessions
Enables/disables command echo for remote access. This applies to Telnet and TRANSIP
sessions.