Digi TransPort WR11, Руководство пользователя

Страница: 691 / 866

Configure security settings Firewall
Digi TransPort WR Routers User Guide 686
Edit
These buttons that appear to the right of the rule open up the rule in an edit text box which
allows the text to be edited. Click on the OK button to commit the changes or Cancel to abandon
the edit.
Reset Hit Counters
Clicking this button resets to 0 all the rule hit counts that appear in the left-hand column of the
table.
Save
Clicking this button saves changes to the table to the fw.txt file. If the changes are not saved
using this button, they will be lost if the router is rebooted or loses power.
Restore
If, after reviewing changes to the table it is decided that the edit should be abandoned, clicking
this button restores the original fw.txt to the table, provided that they have not been saved.
Below the firewall editor table is another table that controls the interfaces to which the firewall
rules apply.
Interface
A list of the available interfaces to which the firewall rules may be applied.
Enabled
Enables the firewall for that interface.
Related CLI commands
To view the firewall rule hits from the command line console, use the type command:
type fwstat.hit
Entity Instance Parameter Values Equivalent web parameter
fw n/a logclr - Reset Hit Counters
fw n/a save - Save
fw n/a - - Restore