Product liability and warranty
October 2014
ISG1000
4
1.3
Service
We will be happy to help solve problems or perform repairs and modifications that are not
described in these operating instructions. Always state the device’s serial number in the event of
claims, problems or questions.
The serial number is on the type plate on the side of the device.
1.4
Intended purpose
The ThermoGrip
induction device ISG1000 is used for the thermal engagement and
disengagement of tools in shrink chucks.
Any other use above and beyond this is deemed not in accordance with the intended use.
We will not be liable for any resulting damage. The operator bears the full risk.
Intended use also includes observing the operating instructions and compliance with the
stipulated inspection and servicing intervals.
Abbildung 1:
Operating display (green LED)
Start / Stop button
Coil
Main switch
Tool location
Figure 1
ThermoGrip
induction device ISG1000
