Safety
October 2014
ISG1000
6
2
Safety
The induction generator has been built to comply with the state-of-the-art design at the time of
delivery and is safe to operate. Nevertheless, there are still risks involved with operating the
device if it is used by untrained or unqualified personnel or if it is not used as intended. Therefore,
must be observed:
Please read the operating instructions carefully and familiarize yourself with the operating
elements before commissioning and using the device!
The operating instructions are an integral part of the function of the induction generator and must
be easily accessible, legible and available in full to all persons who work with the system.
The device may only be operated by trained and competent personnel!
The device may only be used for its intended purpose and only when it is in a fully functional
state!
The induction generator is designed and suited for ThermoGrip
chucks. Problems may arise
when unshrinking / shrink-fitting other chuck types leading to damage to the chucks or to the
induction device itself.
All unauthorized modifications will expire immediately the manufacturer’s warranty. The operator
bears the sole risk of injury to the user or third parties and for any damage to the induction
generator or other elements of the device!
2.1
Selection of the installation site
The ISG1000 is designed as a table-top device and must be positioned safely in a dry and clean
place which is not exposed to vibrations.
Protect against dust, dirt and coolant!
Avoid direct sunlight to improve the legibility of the green LED.
2.2
Risks relating to electrical energy
The device has live parts inside which are dangerous if touched.
Please observe the following safety points:
The device must not be operated when the housing is open!
The device must only be opened by our service personnel or under strict manufacturer’s
guidance!
Keep the device clean. Clean regularly!
Never use compressed air to clean the machine or tool holders nearby the machine, to
prevent chips from being forced to electronics circuits
