Appendix
October 2014
ISG1000
19
95
7.5
Instructions Safety Glove
Description:
Heat protection glove, outer layer consisting of para aramide yarn (KEVLAR)
Fine knitted fabric lined with aramide felt and 100% Nornex knitted fabric
Availability:
Size 10
Color:
yellow
Manufacturer:
JUTEC GmbH, Mellumstr. 23-25, D-26125 Oldenburg
Description:
These gloves have been designed to protect your hands. They are made of
the materials named above. The characteristic features of these gloves are
their long service life and outstanding comfort.
Category:
Instructions:
Check that the gloves offer suitable protection for the activity you are
currently performing. Select the gloves to fit the size of your hands. Remove
the gloves from the wrapping.
When using the gloves, pay attention to the following points:
The maximum touching time depends on the area touched.
For safety reasons this time should never exceed 5 sec.
The open structure of these gloves means that they cannot protect your
hands from punctures and impacts from pointed objects. Penetration by
liquids is also possible. For protection from chemicals, gloves resistant to
such substances should be worn over these gloves. Oil, grease and moisture
reduce the resistance of all gloves to cutting damage and should be avoided.
KEVLAR gloves are resistant to tearing. Do not use these gloves near
machines with moving parts, as your hands could get pulled into the
machine.
Care and repairs:
KEVLAR gloves can be dry-cleaned or washed according to the instructions
on the label. Wash in water and mild detergent at maximum 40°C. DO NOT
USE softening agents, bleach or oxidizing agents, as these weaken the
aramide fibers and reduce the cut-resistance of the gloves. After washing the
gloves, check them carefully for any cuts and worn places. Do not use gloves
which are damaged too much and can no longer be repaired, as these no
longer offer adequate protection.
Storage:
The gloves should be kept in their original wrapping in a dry, clean place.
Avoid exposing the gloves to moisture or high temperatures.
Warning:
The degree of protection required by a special task depends on the risks
involved. You yourself bear final responsibility for selection of the best safety
equipment for the risks involved in your workplace. Please check whether
this article offers adequate protection for the jobs of work you have to
perform. We offer a whole range of cut- and heat-proof KEVLAR gloves for
high-risk jobs of work.
