DIEBOLD NIXDORF CINEO C1010, Руководство пользователя

Страница: 11 / 69

CINEO C1010 Introduction
5 _
Putting the CINEO C1010 into Service

If integrated in a complete cash handling system, disconnect the system from the mains
supply.

Connect the coin recycler to the control unit computer using the USB interface (1 – see
picture below) and the USB cable provided.

Connect the coin recycler to the mains using the power interface (2 – see picture below)
and an appropriate 24V-power supply unit.

If necessary, reconnect the mains supply to the cash handling system.

Use the on-off switch (3 – see picture below) on the rear side to switch the CINEO C1010
on.

Initialize the CINEO C1010 using the control unit computer.

Following a self test the top CINEO C1010 illumination is green indicating the CINEO
C1010 to be ready to operate.

Fill the hoppers either by dropping the coins required into the coin input funnel or dock-
ing the coin transfer cassette providing all coins required (cf. Chap. "Filling the coin hop-
pers ...", p. 22).
1 On-Off switch
2 Interface – PC (USB standard B)
3 Interface - Power
1
2
3