DIEBOLD NIXDORF CINEO C1010, Руководство пользователя

Страница: 41 / 69

CINEO C1010 Cleaning the CINEO C1010
35 _
Cleaning the Coin Validator & Sorting Spiral
Cleaning interval As required, at least twice a year
Cleaning agent/tool Compressed air/high-pressure spray, slightly moistened cleaning
tissues

Switch the CINEO C1010 off.

Open the lid (cf. Chap. "Opening and closing the CINEO C1010 lid", p. 20).

Open the upper acceptance unit (cf. Chap. "Opening and closing the upper coin
acceptance unit", p. 21).
Areas to be cleaned in the lower acceptance unit: centrifuge, coin validator, sorting spiral

Remove dust and coin residues from the coin validator, its sensors, also under the lever
and the sorting spiral using compressed air and a slightly moistened cleaning tissue, if
necessary.

Allow all parts to dry.

Make sure, that the measurement lever of the coin validator can be moved freely and
the tissue did not get caught up in the lever.

Close and switch the CINEO C1010 on again.