DIEBOLD NIXDORF CINEO C1010, Руководство пользователя

Страница: 53 / 69

CINEO C1010 Malfunctions
47 _
ccTalk error
code
Description/Cause Category Remedy/hints By whom
If necessary, clean coin validator
(cf.
Chap. "Cleaning the coin validator &
sorting spiral", p. 31)
0x0A8n65
n = 0..F = Coin
Type Sorting error. Coin was sorted
into the wrong hopper Attention Open lid and upper acceptance unit
(cf.
Chap. "Opening and closing the upper
coin acceptance unit", p. 21)
or payout
unit (cf. Chap. "Opening and closing
the coin payout unit", p. 21)
and free
coins from sorting spiral/chutes
If necessary, clean sorting spiral
(cf.
Chap. "Cleaning the coin validator &
sorting spiral", p. 31)
and chutes
(cf.
Service Manual)
Attendant possessing the
key for the upper/lower
lock
Service
0x0A8n80
n = 0..F = Coin
Type Coin not accepted as coin
acceptance inhibited by con-
trol software Info If necessary, enable coin acceptance
using ccTalk protocol Service
0x0A8n81
n = 0..F = Coin
Type Coin not accepted as coin
inhibited by control software Info If necessary, enable coin using ccTalk
protocol Service
0x0A8n83
n = 0..F = Coin
Type Coin not accepted as normal
coin acceptance band inhibit-
ed by control software (securi-
ty level (narrow acceptance
band) activated) Info If necessary, enable normal coin ac-
ceptance band/channel using ccTalk
protocol Service
0x0A8n91
n = 0..F = Coin
Type Coin could not be accepted
and was rejected as at least
two coins entered the meas-
urement area at the same
time Info Insert coin(s) again Customer
0x0A8n93
n = 0..F = Coin
Type Coin could not be accepted
due to polling timeout Info Increase polling frequency Service
0x0A8n94
n = 0..F = Coin
Type Coin was rejected as coin
acceptance was not polled Info If necessary, increase polling frequency Service
0x0A8n96
n = 0..F = Coin
Type Coin was rejected as coin
position sensors covered
Attention
Open lid and upper acceptance unit
(cf.
Chap. "Opening and closing the upper
coin acceptance unit", p. 21)
and free
coins
If necessary, clean coin validator
(cf.
Chap. "Cleaning the coin validator &
sorting spiral", p. 31)
Attendant possessing the
key for the upper lock
Service
0x0A8n97
n = 0..F = Coin
Type Coin was rejected as first coin
position sensor covered Attention Open lid and upper acceptance unit
(cf.
Chap. "Opening and closing the upper
coin acceptance unit", p. 21)
and free
coins
If necessary, clean coin validator
(cf.
Attendant possessing the
key for the upper lock
Service