DIEBOLD NIXDORF CINEO C1010, Руководство пользователя

Страница: 51 / 69

CINEO C1010 Malfunctions
45 _
ccTalk error
code
Description/Cause Category Remedy/hints By whom
fuge
If necessary, clean centrifuge
(cf.
Chap. "Cleaning the centrifuge", p. 30)
Service
0x0A2018 Measurement timeout during
measurement Info If necessary, open lid and upper ac-
ceptance unit
(cf. Chap. "Opening and
closing the upper coin acceptance unit",
p. 21)
and remove objects from coin
validator
Attendant possessing the
key for the upper lock
0x0A2019 Measurement timeout during
compensation Info If necessary, open lid and upper ac-
ceptance unit
(cf. Chap. "Opening and
closing the upper coin acceptance unit",
p. 21)
and remove objects from coin
validator
Attendant possessing the
key for the upper lock
0x0A201A
At least one sorting sensor
covered
Critical
Open lid and upper acceptance unit
(cf.
Chap. "Opening and closing the upper
coin acceptance unit", p. 21
or payout
unit
(cf. Chap. "Opening and closing
the coin payout unit", p. 21)
and free
coins from sorting spiral/chutes
If necessary, clean sorting spiral
(cf.
Chap. "Cleaning the coin validator &
sorting spiral", p.31)
and chutes
(cf.
Service Manual)
Attendant possessing the
key for the upper/lower
lock
Service
0x0A2020 Operating voltage low Critical Make sure that CINEO C1010 is connect-
ed correctly
(cf. Chap. " Putting the
CINEO C1010 into service", p. 28)
Make sure that the coin validator is
installed correctly
(Service Manual)
Service
Service
0x0A2021 Operating voltage high Critical Make sure that CINEO C1010 is connect-
ed correctly (cf. Chap. " Putting the
CINEO C1010 into service", p. 5)
Make sure that the coin validator is
installed correctly
(Service Manual)
Service
Service
0x0A2022 Coin position sensors affected
by external light Attention Open lid and upper acceptance unit (cf.
Chap. "Opening and closing the upper
coin acceptance unit", p. 21)
and free
coins from validator
If necessary, clean coin validator (cf.
Chap. "Cleaning the coin validator &
sorting spiral", p. 31)
Attendant possessing the
key for the upper lock
Service
0x0A2023 Coin position sensors covered Attention Open lid and upper acceptance unit (cf.
Chap. "Opening and closing the upper
coin acceptance unit", p. 21)
and free
coins
If necessary, clean coin validator (cf.
Chap. "Cleaning the coin validator &
sorting spiral", p. 31)
Attendant possessing the
key for the upper lock
Service
0x0A2025 Coin validator checksum error Critical Update firmware and/or configuration Service