Dickey-John INTELLIAG AI-120, Руководство оператора

Страница: 89 / 195

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606E-201703 Rev B
82 / AUTO SECTION CONTROL SETUP
TYPE
The switch box type setting indicates if controlling sections at the guidance
screen is required.
– None disables the virtual switch icon from appearing on the
guidance screen.
– Virtual displays the virtual switch icon at the top of the guidance
screen to turn sections on and off via the console’s virtual
switchbox.
To Define a Switch Box Type:
2. Press the Type button and select the switch box type as None or
Virtual.
3. Press the Check button to accept.
Figure 115
Switch Box Type
SWITCH ASSIGNMENT
The Switch Assignment menu identifies the number of switches on the
virtual switch box. The maximum number of switches allowed (up to 12) is
based on the number of sections entered at the Section Setup menu.
Example : 3 switches is the maximum number of switches allowed if only 3
sections are enabled.
To assign switches:
1. At the Switch Box Setup menu, press the Switches button. Enter the
number of switches assigned to each section control.
2. Press the Check button to accept.
3. At the Section/Switch table, enter the desired switch assignment for
each section to enable and disable planter sections. More than one
section can be assigned to an individual switch. (
Figure 116 ) illustrates
section 1 controlled by switch 1, however, section 1 can be reassigned
to switch 2 or 3.
IMPORTANT: All rows must be assigned to a switch in IntelliAg first
before the AI-120 terminal will recognize.
2
3