Dickey-John INTELLIAG AI-120 Скачать руководство пользователя страница 62

Страница: 62 / 195

OPERATOR’S MANUAL

AI-120 Virtual Terminal

11001-1606E-201703 Rev B

TERMINAL SETUP / 55

SERIAL PORT

Select the terminal serial port to which the device is connected. GPS Output
Com 2 is not used with the AI-120.

1. Press the

System/Serial Ports

icons to display the Serial Ports Setup

screen.
– Non-AGI receivers, such as IntelliAg, must have a com port setting

of 1.

Other connections:

• SGR-1, AGI-3 or AGI-4 GPS Receiver is connected to serial port 1 with

all Topcon harnesses.

• NMEA GPS Output is generally on serial port 2 if in use.
• Xlinks is on serial port 3 if in use, or on serial port 2 if NMEA GPS out is

not in use.

Figure 84
GPS Serial Port

ALARMS

The General Alarm Setup menu lists the standard alarms that trigger an
alarm state. All alarms listed are defaulted to enabled. All alarms can be
disabled or individual alarms disabled to prevent an alarm occurrence.

To Change an Alarm State:

1. Press the

Systems/Alarms/General

icons to display the General Alarm

Setup menu.

2. At the Alarm list, alarms can be changed as follows:

– To disable/enable all alarms, press the

All General Alarms

button.

– To disable/enable an individual alarm, press the desired alarm

button to highlight and press the

Alarm State

button.

Содержание INTELLIAG AI-120




































































































































































































Результаты поиска

Содержание INTELLIAG AI-120

Отзывы:

Бренды по названию

Популярные бренды

Dickey-John INTELLIAG AI-120, Руководство оператора

Результаты поиска

Содержание INTELLIAG AI-120

Отзывы:

Бренды по названию

Популярные бренды