![Dickey-John INTELLIAG AI-120 Скачать руководство пользователя страница 188](http://html1.mh-extra.com/html/dickey-john/intelliag-ai-120/intelliag-ai-120_operators-manual_2494937188.webp)
OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606E-201703 Rev B
APPENDIX A / 181
APPENDIX A
AI-120 POWER STATUS LED’S
LED indicators are located on the right side of the terminal and indicate
current power status of the terminal.
BAT
EXT
BAT
EXT
Power status is normal. Battery LED flashing blue/green indicates battery is
charging and external supply is equal to or above 12.0 volts. Internal battery
is equal to or above 7.2 volts.
Power status is normal. LED’s do not flash. External supply is equal to or
above 12.0 volts. Internal battery is equal to or above 7.2 volts.
External supply is low but acceptable. Voltage is between 10.8 and 12.0
volts. The console will start.
Internal battery is low but acceptable. Voltage is between 7.0 and 7.2
volts. The console will start.
External supply is below 10.8 volts. The console will not start and the LED’s
will flash together for 10 seconds before turning off.
Battery is below 7.0 volts. The console will not start and the LED’s will flash
together for 10 seconds before turning off. If the console is left connected to
power, the battery LED will flash green every 5 seconds to show charging is in
progress.
Both LED’s green but flashing alternately for ten seconds indicates that
external power and battery are good, but main computer not responding
correctly. The console will not start. Technical assistance is required.
Battery LED flashing red indicates boot loader mode.
External power LED flashing red indicates console to trying to power up
with no external supply applied.
If the LEDs reamin blank after pressing the start button for three seconds, the
power management system is not operating and the console will not start.
A shutdown with a data save can be enabled by holding the start button for 3
seconds. Holding the start button for 10 seconds will cause an immediate
shutdown with no data save.
Содержание INTELLIAG AI-120
