Dibal Mistral M-510, Руководство пользователя

Страница: 85 / 165

500 Range
49-M500WMEN25
77
Remember that the last character of the bar code is the
checksum, which is why, if you do not wish to, it is not necessary to
enter it. Therefore, you will need 12 or 7 digits for each EAN (the
last character is omitted).
In normal working position, when a bar code is read by a scanner,
a search is made through all those articles whose EAN
SCANNER CODE corresponds to that which has been read by
the scanner. In the case of finding an article whose EAN code
corresponds, the information on this article will show up on the
screen, just as if you had pressed the key corresponding to its
PLU. In the case of not finding any article meeting this condition,
wrong code message will appear.
If there is no scanner and you wish to make the search with the
aid of the EAN scanner code, you can press the F3 key and the
letters:
EAN<*************>
will show up on the display.
Here, you can enter the bar code to make the search. The
character “*” will be used as a substitute. To seek an EAN 8 code,
the last five characters must be “-“ and consequently, it will only
seek in articles with an EAN 8 code.
When seeking an article while programming the PLU, you can
read with the scanner, and the programming of the first of the
codes that meet the condition of the EAN code read by the
scanner will show up.
You can also print a label with the bar code to be the article’s
EAN. For this purpose, you will have to change configuration
parameter of the label EAN-13 FORMAT takes the value 3.
Thus, if you are working in label mode, the bar code that the
article has within the EAN scanner code will appear.
Remember that in this case you will be able to print the direct
code or the representation of certain values depending on the
corresponding representative letters within the bar code.
Prices can also be interpreted on the bar code which is then read.
For this purpose, the title of the article’s EAN code must contain
the letters E or X..
Reading with scanner AMOUNT, WEIGHT, PRICE, etc.
To read AMOUNT, WEIGHT, PRICE, etc. with the scanner, the
INTERPRETATION parameter must be set.
The following are the different cases:
In the case of NON-WEIGHED articles:
••••
If the price of the article is 0 and the letter ‘E’ appears on
the article’s EAN code, the scale will associate the value
of the positions of the EAN code where the ‘E’ are with
the value of the price of the article for that sale
••••
If the price is not 0, it will show the price which the scale
has entered.
••••
If the price is 0, but it does not detect ‘E’ in the article’s
EAN code, the article will show up on the screen but in
the position for entering the price.