Dibal Mistral M-510, Руководство пользователя

Страница: 65 / 165

500 Range
49-M500WMEN25
57
MENU 4
∗∗∗∗
∗∗∗∗
MENU
F2
F1
MENU
4 1
X
∗∗∗∗
MENU
PROG 4
4-9
TEXTS
PROG 4 1
TEXTS 1-5
HEADING LINES
PROG HEAD 1
TYPE STD
PROG HEAD 2
TYPE 2 x 2
6.TEXTS [ 4 ]
This programming allows to define all the programmable texts of
the scale.
To enter in this menu press MENU for 2 seconds and then 4
Press
∗∗∗∗
to save.
The access to the submenus it is possible by pressing the key
∗∗∗∗
or by entering directly the code of the submenu after pressing
MENU.
Change from one option to another by using F2 to go down the
menu and F1 to go up.
To exit Configuration programming, press MENU
6.1. HEADING LINES (FREE TEXT IN LABEL) [ 4
1 ]
These lines can be printed on labels. Up to 15 header lines of up
to 52 characters long can be stored, depending on the size of the
letter selected for printing.
To program header lines:
1. To access this configuration, press MENU and then code 4
1
2. Use the keypadto type in the number of the line to be
programmed and then press X.
3. Enter the size of the letter from this table:
Press

to store the line.
For example: Ramon Fish Market
To quit programming press MENU and return to working mode
A series of special characters can be inserted in any text of the
article and free text for the label. They allow you to modify some
parameters during printing.
Control characters are inserted in any part of the text by pressing
F5.
Then insert the special character code and press
∗∗∗∗
to save.
To disable the mode, press F5 again.
The control character codes are as follows:
- 9: Do not centre when placed in the first position of
the text.
-
9: Link together when placed anywhere in the text
except for the first position.
-
10: New line Anywhere in the text.