Dibal Mistral M-510, Руководство пользователя

Страница: 48 / 165

USER´S MANUAL
49-M500WMEN25
40
PROG 3 1 1
Day Movement
YES
PROG 3 1 2
0
End of Day
PROG 3 1 3
0
Message Label
PROG 3 1 4
PC Receipt Re
LA
PROG 3 1 5
0
PC Com Report
5.1.1.1. Day Movement
[ 3 1 1 ]
The value of this parameter indicates if the scale sends data to
the computer. This parameter has either of the following values:
‘NO’ – The scale does NOT send data to the computer.
‘YES’ – The scale DOES send data to the computer.
‘END OF DAY’ – The scale send data to the computer when
an End of Day is requested
5.1.1.2. End of Day
[ 3 1 2 ]
The value of this parameter indicates if the scale does close shop
and send data to the computer.
'0 '- Disabled End of Day.
'1 '- Enabled End of Day.
5.1.1.3. Label messages computer
[ 3 1 3 ]
This parameter is used to differentiate between the messages
sent to the PC for the receipt and label.
‘0’ – It does not differentiate between the messages on the
receipt and label.
‘1’ – It differentiates between the messages on the receipt and
label.
5.1.1.4. PC Receipt Registration
[ 3 1 4 ]
This parameter is used to select one of two types of receipt
registers, which can be used to send a literal copy of the receipt to
the PC., i.e. the sales effected at the scales.
Possible values are:
‘LA’ – Sales are sent to the PC through the LA register.
‘LY’ – Sales are sent to the PC through the LY register. This
provides more complete information.
If fiscal mode is on, this parameter can only be set to 1 (LY register).
5.1.1.5. Report on communication with PC
[ 3 1
5 ]
This parameter permits a series of messages to be displayed on the
printer, indicating the status of different processes that are executed
in communications with the PC.
‘0’ – Messages on processes related to PC communication are
not printed.
‘1’ – Messages on processes related to PC communication are
printed.
These messages are created for different process such as “start and
end a Start of Day”, “start and end price sending”, “start-up scales”,
etc. An example of such a message is:
The PC starts a Start of day. (PC: START 2000)
"End of Day START Msg: xx"
The PC ends a Start of Day. (PC: END 2000)
"End of Day OK Msg: xx"
The time and date that the event occurs are shown in the line above
the message. The internal number of the message sent between the
PC and the scales is printed at the end of each text.