Dibal Mistral M-510, Руководство пользователя

Страница: 84 / 165

USER´S MANUAL
49-M500WMEN25
76
8.SCANNER
CONNECTION*
The Software has been developed for Dibal 500 Range scales to
communicate with a scanner for reading bar codes, so that the
article bar codes are read and sales operations carried out on the
scale.
The scanner must have the requirement COMMUNICATION
SERIES RS-232 through a DB9 female connector.
The scale RS-232 connector, has power output for the scanner.
The DB9 powered PIN is PIN 9.
The scale software is set up with the following protocol for the
scanner:
•
Speed: 9600 bauds
•
8 data bits
•
Without parity
The scanner must send the bar code followed by CR or LF.
8.1. SCANNER INSTALLATION*
The scanner is connected taking into account that the output of
the scale feeds to 5V.
8.2. SCANNER* BAR CODE READING
All articles will have a field called EAN in which the EAN scanner
code can be entered for the particular article. In the said field,
representative numbers and letters can appear within the bar
code. This field is for the exclusive use of the scanner. In it, you
can enter:
•
13 characters, then becoming an EAN 13
•
8 characters followed by spaces to form an EAN 8
To program the article’s EAN code, enter the PLU programming
option. When you reach the EAN field, enter the EAN code you
require. To do so, you can:
•
Read the bar code with the scanner and the value will be
updated.
•
Enter it manually, allowing to this end the representative
numbers and letters within the bar code.
Remember that depending on whether there are 13 or 8
characters in this field, you will have an EAN 13 or an EAN 8
respectively.
* EAN13 reading. Models
W-020, W-025, M-520 & M-525
* Only Models
W-020, W-025, M-520 & M-525
* EAN13 reading. Models
W-020, W-025, M-520 & M-525