JetBox-FloydSC User Manual rev 0.1
Page 28
JetBox-FloydSC assembly is basically split into two parts:
1. Installing the Jetson Module on FloydSC
2. Installing FloydSC inside the JetBox
Installing the Jetson Module on FloydSC
5. If not present on board, install 4x M2.5 x 6.5mm long F/F spacers on board using 4x M2.5 x 4mm pan
head screws inserted from the bottom. See illustration.
Figure 13
FloydSC Stand-off Locations
6. Insert module into socket at 45-degree angle. See illustration.
Figure 14
FloydSC Jetson Module Insertion
