DH Instruments PPC4, Руководство по эксплуатации и обслуживанию

Страница: 134 / 228

PPC4™ OPERATION AND MAINTENANCE MANUAL
© 2009 DH Instruments, a Fluke Company Page 122
[Settings], <More >>>, <Ethernet>, IP displays IP address. If Setting is
“DHCP” then IP is selected by LAN and cannot be edited. If Setting is
“Manual” then IP address may be entered or edited.
[Settings], <More >>>, <Ethernet>, UDP displays the UDP port. Cannot be
edited.
[Settings], <More >>>, <Ethernet>, MAC address displays the MAC
address unique to each PPC4 and contained in the Ethernet module if the
Ethernet option is selected. Cannot be edited.
5.7.10 Calibration

PURPOSE
To calibrate the PPC4 utility sensor, Hi and/or Lo Q-RPTs and adjust the on-board barometer.
This function is considered part of PPC4 maintenance and is therefore covered in the
maintenance section of this manual (see Sections 7.2, 7.3, 7.4).

OPERATION
See Sections 7.2, 7.3 and 7.4.
5.7.11 Uncertainty

PURPOSE
This function is considered part of PPC4 maintenance and is therefore covered in the
maintenance section of this manual. See Section 7.2.7.3.

OPERATION
This function is considered part of PPC4 maintenance and is therefore covered in the
maintenance section of this manual. See Section 7.2.7.3.
5.7.12 Internal

PURPOSE
To view, set, adjust, and maintain various aspects of PPC4’s internal operation (see
Section 3.2.27).

OPERATION
[Settings], <More >>>, <Internal> opens the Internal settings screen.
5.7.12.1 ID

PURPOSE
To enter an alphanumeric identification (ID) for the PPC4 (see Section 3.2.27.1).

OPERATION
[Settings], <More >>>, <Internal>, ID opens the ID edit screen.
[OK] to accept and return to the Main Run Screen, [Back] to return to the ID
screen without making changes, [Esc] or

to exit to the Main Run Screen
without making changes.