DH Instruments PPC4, Руководство по эксплуатации и обслуживанию

Страница: 114 / 228

PPC4™ OPERATION AND MAINTENANCE MANUAL
© 2009 DH Instruments, a Fluke Company Page 102
5.7.2.3 Advanced Test
The Advanced Test provides the opportunity to create, save and run up to 20 test
sequences with greater flexibility than with Quick Test.

OPERATION
To run, edit or delete an Advanced
Test sequence,
[Tools], <AutoTest>,
Advanced Test from the Main Run
Screen.
At the top of the Advanced Test
screen is the
Test field, with a drop
down list of previously saved
Advanced Test sequences. To run a
test from this list, select the test.
Note
The summary information of the test is then shown in the Test:
field as well as in the information fields on the left side of the
screen. Checking this information helps to ensure that the
correct sequence is being run and that it will not exceed the
maximum pressure of the UUT.
From the Advanced Test main screen, selections include:
[New] Create a new Advanced Test.
[Edit] Edit and existing Advanced Test.
[Delete] Deletes the active Advanced Test
[OK] Runs the active Advanced Test
[Back] Returns to the [Tools], <AutoTest> tab
[Esc] or

exits to the Main Run Screen
5.7.2.3.1
New Test
[Tools], <AutoTest>, Advanced Test, [New] initiates creation of an Advanced
Test. The first step in creating an Advanced Test is to create an AutoRange for
the test span (See Section 5.7.1).
In the AutoRanger screen there are fields to select or enter values.
Unit: The unit of measure associated with the AutoRange.
Mode: The measurement mode associated with the AutoRange.
The choice of measurement modes offered reflects all
the Q-RPT types available (Axxx, Gxxx, BGxxx) in the
PPC4 system, not just the active Q-RPT.
Full Scale: Enter the full scale pressure value in the unit of measure
specified in the Unit field and [OK] to accept. If the full
scale pressure entered cannot be covered by any of the
Q-RPTs available, an error window is displayed (“No
suitable RPTs found”). If the full scale pressure can be
covered by an available Q-RPT, the entry is accepted.