DH Instruments MFC-CB Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 104

background image

3. OPERATION

Page

17

©2001~2007

DH Instruments, a Fluke Company

The value of the

gas conversion factor

can be edited as desired. Press

[ENTER]

to

return to the MAIN run screen with the entered

K factor

active.

The K factor is only

used if the current unit of measure is a flow unit (see Section 3.2.2). The letter <K>
is always appended to the flow unit indication in the run screens when the K
function is ON (e.g., sccmK).

Turning K ON or OFF or making a change to the K factor value resets the active device

channel output to zero.

K factor ON/OFF and the K factor value are device channel specific (DEV1, DEV2).

Settings made for one device channel do not affect the other channel.

3.2.2

[UNIT]

PURPOSE

To specify the unit of measure in which MFC-CB displays set points and measured
values on the active device channel.

PRINCIPLE

MFC-CB operates in either volts (V) or milliamps (mA). It also converts V or mA to flow
values using a simple linear relationship between the voltage or current range and the
flow range in a flow unit (see Section 7.1.2).

The electrical mode and range in which to operate as well as the flow unit and the flow
unit range are specified by the active MFC profile for each device channel (see
Section 3.3.1).

The units of measure available to display MFC-CB set points and measurements are V or
mA, %FS and a flow unit if the MFC profile specifies a flow unit. MFC profiles #1 and #2
are factory default profiles that do not specify a specific flow range. MFC profile #1
specifies operation from 0 to 5 V and MFC profile #2 specifies operation from 4 to 20 mA.
When using profile #1 or #2, no flow unit is available.

OPERATION

To change the unit of measure press

[UNIT]

.

The display is:

Select the desired unit of measure. Operation returns to the MAIN run screen with the
display unit changed to the selected unit.

The flow unit available under [UNIT] is determined by the MFC profile active for the

device channel. When using MFC profile #1 or #2, no flow unit is available as none is

specified by the profile. To work in a flow unit, set up and use a custom MFC profile (see
Section 3.3.1). MFC profile #1 is 0 to 5 V. MFC profile #2 is 4 to 20 mA.

The UNIT function is device channel specific. The unit setting for one device channel does

not affect the other device channel.

1V 2%FS 3sccm

«
...
23
24
25
26
27
...
»

Содержание MFC-CB









































































































Отзывы:

Нет отзывов

Похожие инструкции для MFC-CB

Бренд: ECKELMANN Страницы: 178

Бренд: UCS Страницы: 4

Elemec3 013-02-0095-002

Бренд: GAI-Tronics Страницы: 12

Бренд: H3C Страницы: 5

Бренд: H3C Страницы: 4

Бренд: jablotron Страницы: 22

Бренд: jablotron Страницы: 2

Бренд: Magellan Страницы: 2

CentriPro Aquavar SOLO

Бренд: Xylem Страницы: 48

Бренд: Fuji Electric Страницы: 12

Бренд: heat-timer Страницы: 36

Бренд: Joy-it Страницы: 7

Бренд: Woodward Страницы: 112

Бренд: AirCycler Страницы: 2

Torque Converter Lock-Up

Бренд: TS Performance Страницы: 4

Бренд: Danfoss Страницы: 8

Бренд: National Instruments Страницы: 22

Serial Interface Module

Бренд: Federal Signal Corporation Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды