35
START-UP
mains
STARTING
In service
If the last shutdown was
in service
(10 sec)
Out of
service
If the last shutdown was
out of service
START
STOP
IN SERVICE
OUT OF SERVICE
ACCESS TO MAIN MENU
DGFIT
has
4 MAIN MENU, to access the parameters
To ACCESS the 4 main MENU
Press the SET button for 3 sec.
To
SCROLL
the
4 MAIN
MENU
use the buttons
To
ACCESS and EXIT
the
MAIN MENU
use the buttons
BASIC
BASIC PARAMETERS
for the configuration of the drive.
these parameters must necessarily be set during installation.
ADV
ADVANCED PARAMETERS
for the configuration of the drive.
INSP
INSPECTION PARAMETERS,
you can
display the hours of work, the number of starts,
alarm history, etc..
TEST
TEST mode
: start and stop the pump in manual mode and change the frequency in
steps of 1 Hz. Control of the operating parameters of the motor and inverter.
WARNING: DURING MANUAL OPERATION, AUTOMATIC CONTROLS ARE
EXCLUDED, AND THE OPERATOR MUST AVOID ANY INCORRECT OPERATION.
ACCESS TO PARAMETERS
In the MAIN MENU:
-
BASE
-
ADVANCED
-
INSPECTION
-
TEST
To
SCROLL
and
MODIFY
the parameters
use the
indicated keys
To
ENTER and
EXIT
the
parameters use
the indicated
keys
