High-performance automatic gun
AGMD
1-1-AGMD-514&515-E-002-1
9
3 Designs
The high-performance automatic spray gun AGMD is available in different designs. They
differ in the use of a variety of components and/or in the material flow.
Note!
Gun heads marked with a “U” have two material lines, allowing coating material to
circulate through the head so a colour change can be performed while the gun is
closed.
Ordering example: AGMD-514 U FF-797c
Type of gun With circulation*
Nozzle size (see table)
Air cap (see table)
AGMD-514
U
FF
797c
* Without circulation= ″U″ does not apply
3.1 Technical data
3.1.1
High-performance automatic spray guns AGMD-514 and AGMD-515
Spray system:
AGMD-514 conventional air-atomisation
AGMD-515 TransTech or HVLP air-atomisation
Maximum pressures:
0 to 14 bar material (MAT)
6 bar control air system (CYL)
9 bar atomiser air (ATOM) and horn air (FAN)
Switching times:
< 60 msec. At 5.8 bar control air system
Weight:
Approx. 665 g
Dimensions:
Refer to dimensioned sketch
Materials:
Gun head:
Stainless steel 1.4305
Nozzle (standard):
Stainless steel 1.4305
Paint needle (standard):
Stainless steel 1.4305
Air distribution ring:
Brass, chemically nickel-plated
Air cap:
Brass, chemically nickel-plated
Air cap retaining ring:
Brass, chemically nickel-plated
Material-contacting seals:
VITON for water-based coatings
(on request)
VITON EX for solvent-based coatings
(standard)
Perfluorelastomer for highest resistance
(on request)
AGMD-514/515
with
intermediate
plate AGMD-245-1
