High-performance automatic gun
AGMD
1-1-AGMD-514&515-E-002-1
6
2.3 Basic safety instructions
The spray system with the high-performance automatic spray gun AGMD must only be
operated by trained personnel.
A warning sign must be posted in a conspicuous place close to the spraying area. This
warning sign should contain the most important functions and safety measures that
users must observe.
The dangers present when cleaning spray guns must be clearly highlighted.
The start-up of the system by the user may only be performed after an initial test by an
authorised technician prior to the transfer of risk to the user.
2.4 Instructions
Persons who work with the spraying device must be instructed about dangers before
beginning their activities.
This instruction must be repeated and documented at least once per year.
2.5 Work stations
Danger!
Danger of fire and explosion!
Smoking and open flames are strictly prohibited in areas prone to fire and
explosion.
No accumulations of coating materials must be allowed to collect in spray
booths, on spraying stands, or anywhere in the entire work area.
Access doors to the spray booths must remain closed during spraying.
Sources of ignition must be avoided.
2.6 Cleaning
Danger!
Danger of fire and explosion!
Accumulations of coating materials must be removed.
The following must be cleaned regularly:
Work piece fixtures
Suction devices
Leakage mist separators and their immediate vicinity
Technical ventilation must be active during cleaning work.
Use only electrically conductive containers for the cleaning fluids. Additionally,
these containers must be earthed.
Use only solvents with a flashpoint that is at least 5°C higher than the surrounding
temperature.
When cleaning the guns, wear suitable protective clothing, such as gloves, safety
goggles, etc.
