Detex DSI ES9000-48, Инструкции по сборке, установке и эксплуатации

Страница: 5 / 27

5 INS9000 220523
DESIGNED SECURITY INC.
1402 Hawthorne Street Bastrop, Texas 78602
800-272-3555
Fax 512 321 9181
www.dsigo.com
Email: dsi@dsigo.com
Precise placement and alignment of pedestals is critical for both functional and aesthetic
performance. Ensure pedestals are properly spaced and aligned square, level, and plumb.
Refer to the following diagram for expressions used in this section
LOCATING YOUR TURNSTILE SYSTEM
There are three key technical considerations for locating the turnstiles. Two fairly obvious, the other,
not as much.
The first obvious consideration is that a solid, stable mounting point for each pedestal is necessary to
maintain proper alignment. Select a location that is flat and level, minimizing crowns or bows that would
require pedestal shimming.
The second fairly obvious placement consideration is not to put turnstiles such that either vestibule is
too close to a perpendicular barrier such as a wall, door, or velvet rope. This can cause queueing
issues that will slow traffic and possibly leave users stranded in the lane waiting for traffic to clear.
Pedestals placed too close to walls may make cover removal difficult.
The not-so-obvious consideration concerns Free Exit applications. If the Exit side approach is too long,
users may be encouraged to achieve speeds such that they will get to the gate before it fully opens.
ENTRY/PUBLIC SIDE
EXIT/SECURE SIDE
PRIMARY/LOCAL
ELECTRONICS
REMOTE ELECTRONICS
EXIT
VESTIBULE
EXIT
VESTIBULE
ENTRY VESTIBULE
PRIMARY/LOCAL
ELECTRONICS
2 “B” WIRE GROUPS
1 “A” WIRE GROUP
1 “B” WIRE GROUP
1 “A” WIRE GROUP
ENTRY VESTIBULE
SITE PREPARATION