PRO COMPACT & CAD D300 v2.4
Page 13
Black high-pressure hose to connect the membrane outlet to the pressure sensor of
the control panel.
Blue
Serto
hose to connect the water production outlet of the membranes to the inlet
of the switchboard probe.
Tricoclair hose with an inside Ø of 10 mm (allow a length of 20 meters), which you
must connect either directly to the tanks, or to the distribution clarinet or to the inlet of
the fresh water unit, provided that there is no valve at the outlet of the fresh water
tank.
4mm capillary tube. It connects to the LP manometer and connects to the side of the
HP pump.
12-pin plug, to be connected from the control panel to the electrical box.
2-pin plug, to be connected from the control panel to the electrical box.
Screw socket with 2-pin domino, connects to the 2-wire cable coming out of the
electrical box.
Screw socket to connect the electrical box to the pressure sensor on the control panel.
Ø 15mm discharge pipe, not supplied, which goes from the control panel to the boat's
discharge thru-hull.
230V (or 400V) power cable of the electrical box, to be connected to the output of the
circuit breaker.
Motor power cable.
Pre-pump power cable.
Power cable for the rinsing solenoid valve located on the pre-filters.
Reset fuse if the pre-pump impeller is blocked.
1.
