PRO COMPACT & CAD D300 v2.4
Page 9
Cartridge prefilter block
Ø
The prefilter must also be installed beneath the waterline to ensure a better
yield/output. It must be easy to access.
Ø
The fixing bracket is reversible to allow you to adjust the installation height.
Ø
For the inlet and outlet
, piping connections must be made with Tricoflex Ø 15 mm
(inside diameter). Do not forget to fasten 2 stainless steel collars on each fitting.
Ø
Allow a minimum of 3 cm below the filter body for the clearance of the tank when
opening it. A screw is provided for screwing / unscrewing it.
Ø
A solenoid valve is mounted behind the prefilter for automatic rinsing.
Connections
Ø
Fasten two stainless steel collars on each connection, with the clamping heads
positioned opposite one another.
Ø
Connection can be made under a sink, a washbasin or on the path of the pressurized
cold water piping.
Ø
If the pipes are to pass through walls or be in contact with sharp corners, provide
protection against wear and friction by inserting them into a sheath or pipe of greater
diameter.
