14
Screens which display a small up arrow in the upper right and a small down arrow in the lower
right are part of a series of screens which can be accessed by pressing either the
UP
or
DOWN
arrow keys. If the operator has not pressed a key for an hour, the remote terminal will
return to the Home Screen.
Figure 1
2.2
Zone Setpoints (Figure 2 and 3)
Pressing the
Prg
key from the Home Screen displays the ZONE SETPOINTS (Figure 2). This
menu allows for modifications of the temperature and humidity set points specific to the unit.
To modify the set points, press the
ENTER
key and use the arrow keys until the desired
setting is shown. Press the
ENTER
key to accept the set point value. To return to the Home
Screen, press the
Esc
key.
Figure 2
If pool heating is included in the unit, the up and down arrow keys will be shown on the right of
the screen. Press the
DOWN
key and the screen shown in Figure 3 will appear. Set the pool
water temperature set point with the
ENTER
and
UP
and
DOWN
keys and press the
ENTER
key to modify. The Partial Pool set point will be shown in a similar manner when the partial pool
condenser is supplied with the dehumidifier.
To return to the MAIN MENU, press the
Esc
key.
Desert Aire - CM3530 Manual
Содержание CM3530 Series
