manualshive.com logo in svg

Deprag AST11-1, Руководство по эксплуатации, Страница: 40 / 122

Поделиться
Скачать
Deprag AST11-1 Скачать руководство пользователя страница 40

 

40

 

 

8.2.5.2.2 Statistics 

To use the statistics display, make sure to include the command STATISTICS in the 
screwdriver program. 
The data will not be saved permanently. When the AST11 is switched off, the data will be 
deleted. 

8.2.5.2.2.1 Show 

First, input the program number to display the statistics. Then you can select between dis-
play of torque or angle. 
The last 100 values are used to calculate the statistics. 
The following values are shown: 

•  Number of Data Sets 
• Average  
•  Standard Deviation Actual 
•  Standard Deviation in Percentage 
• CP–Value 
• CPK–Value 

 
Use the cursor keys to switch between the individual display values. 
The left function key allows the deletion of the statistics of an individual program. 
The right function key allows the inputting of limit values for the CP- and CPK-Value calcu-
lation. 
If no limit values are e/- 15% of the average values are used for limits. 

8.2.5.2.2.2 Delete 

It is possible to either delete the complete statistics for all programs (left cursor key) or on-
ly the statistics for individual programs (right cursor key). 

8.2.5.3 Menu 

Setup 

Use the setup menu to input general sequence controller adjustments. 

8.2.5.3.1 Date / Time 

The current system time as well as system date will be displayed. Use the left function key 
to change time and date. Proceed using the following steps:  

•  Press key CHANGE, a blinking cursor appears over the date  
•  Input the current day, confirm with ENTER key, the current day will be displayed and 

the blinking cursor appears over the month. 

•  Input current month, confirm with ENTER key, the current month will be displayed 

and the blinking cursor appears over the year. 

•  Input current year, confirm with ENTER key, the current year will be displayed and 

the blinking cursor appears over the hour area of the time. 

•  Input current time (hour), confirm with ENTER key, the current time (hour) will be dis-

played and the blinking cursor appears over the minute area of the time 

•  Input current time (minute), confirm with ENTER key, the current time (minute) will be 

displayed and the blinking cursor appears over the seconds area of the time 

•  Input current time (seconds), confirm with ENTER key, the current time (minute) will 

be displayed 

 
Use the left function key to accept the changes. 

Содержание AST11-1



























































































































Отзывы:

Нет отзывов