Denyo GAW-185ES2, Инструкция по эксплуатации

Страница: 7 / 49

For safe use of the machine GAW-185ES2
- 4 -
DANGER : Electric shock
•
Never touch electrical components such as output terminal and internal
wiring while the machine is running. For cable connection or for
inspection and maintenance of the machine, be sure to turn OFF the
circuit breaker and stop the engine, before starting such a work.
•
When the machine or your body is wet, it is extremely dangerous.
Never touch the machine in such a state.
Electric shock that leads to death may arise, if the above
precautions are neglected.
DANGER : Poisoning caused by exhaust gas
•
The exhaust gas from the engine contains substances that are
hazardous to human bodies.
Do not run the machine in a place of inferior ventilation such as tunnel
and indoors.
If it is necessary to run the machine in such a place, provide sufficient
ventilation using ventilating equipment or the like.
Furthermore, never direct the exhaust to passers, private homes and
others.
Serious injury or death may arise due to oxygen deficiency or toxic
gas, if the above precautions are neglected.
DANGER : Personal injury
•
There are components rotating at high speed in the machine.
•
Make sure to stop the engine, before starting maintenance and
inspection of the machine.
Personal injury may arise due to roll-in of your hands by rotating
components, if you fail to observe the precautions given above.
CAUTION : Fire
•
Fuel and oil are combustible materials. Never bring any fire close to
the machine. Do not use the machine in a place where the machine is
exposed to sparks of welding or of a sander. Do not perform fueling
while you are smoking or while the machine is running.
•
If the fuel or oil has spilt, fully wipe it off.
Ignition or kindling may occur, a fire may arise and burn injury may
result, if you fail to observe the precautions given above.
CAUTION : Eye deficiency
•
Always use a helmet and a hand shield for execution of welding work, for
protection of eyes against harsh light and for protection of face and neck
against the radiant energy directly irradiated from the arc.
Eye deficiency will occur if welding work is executed with naked
eyes.