Denyo GAW-185ES2, Инструкция по эксплуатации

Страница: 2 / 49

Thank you very much for your recent selection of a Denyo product.
This is a noise isolated engine welder & generator combined machine (hereinafter called "machine").
(See Page 40 for the specification.)
For handling of the machine and for working with the welder and generator functions of the machine,
observe applicable laws (Electricity Enterprises Law, Electric Engineering Technicians Law,
Occupational Health and Safety Law, Fire Services Act, Noise Control Law, etc.) as well as their
relevant laws and regulations.
This machine falls into the category of mobile electric works specified in the Electricity Enterprises
Law. It is necessary to carry out its handling, reporting and others in accordance with its relevant
laws and regulations.
This instruction manual …
This instruction manual explains correct handling method, simple inspection and care of the machine,
for permitting safe operation of the machine and for fully exhibiting the machine performance.
For ensuring safety, it is essential that qualified persons or those who understand welders and who
have knowledge and skill to safely handle welders implement installation, inspection, maintenance
and repair to the machine.
Erroneous handling of the machine may lead to serious injury or even loss of life.
Make sure to carefully read this manual and fully understand its contents before use
of the machine.
If you lend the machine to somebody else or allow such a person to use the machine, make sure to
explain the machine handling method and instruct him to read this “Instruction manual” before use of
the machine.
See the covenant for product warranty attached hereto regarding product warranty.
Keep this manual in a fixed place of easy access that permits reference to it whenever it is needed.
See the engine instruction manual (separate volume) for handling, maintenance and others of the
engine. For matters that are described in both of this manual and the engine instruction manual,
observe instructions given in this manual.
If this machine is mounted on a vehicle, it is not permitted to cause the vehicle to travel in the state
where this machine is running.
If you lose this instruction manual or if this instruction manual becomes illegible because of
contamination or the like, give us an order for a new instruction manual.
There is a possibility where the contents of this manual do not meet your machine due to changes to
the specification.
Enter the name of the sales representative, workshop for servicing and serial number of the machine
in the applicable columns appearing below upon purchase of the machine.
“The contact for inquiries is shown on the back cover of this instruction manual.”