Denyo GAW-185ES2, Инструкция по эксплуатации

Страница: 12 / 49

Names of components GAW-185ES2
- 9 -
1-4 Digital display monitor
①
Welding current meter
②
Set / actual current indicator
③
ODO meter (section hour meter function)
④
Display switching button
⑤
Frequency indicator
(1) Welding current meter
・
Welding current meter displays the actual current value and the current setting of the welding output.
Welding current meter displays the actual current value during welding. The welding current meter
displays the setting value under welding stop.
The welding current is adjusted by turning the knob of
the welding current regulator.
・
If the protective device of the machine is operated during operation, display of welding current meter
will switch to abnormal Symbol.
In that case, please identify the abnormal portion from Symbol. And, check and maintenance.
(2) ODO meter
（
ODO
）
・
This will display the accumulated operating time of the machine. Hour meter will start the
integration when the starter switch set to the "driving" position.
Clock mark of the display unit
blinks during integration.
［
Note
］：
When operating on without battery, hour meter counts the operating time from after the
engine is started.
［
Note
］：
If you do not use the welder a long period of time, the internal battery of the digital display
monitor is exhausted. And, it may be integrated time meter stopped does not display.
Accumulated time meter is even no longer displayed, the integration time is not reset.
In this case, when the starter switch set to the "operation", it displays the hour meter by
using a power from battery. Internal battery for the monitor is charged with be operated to
start the engine.