A
WARNING
HOT COOLANT can cause severe scalds.
■ If the radiator cap is opened while the water
temperature is high, steam or hot water will
spout out.
* During operation or immediately after stopping
the machine, do not open the radiator cap while
the water temperature is high.
* When cooling water needs to be checked or
supplied, wait until the engine is cooled (50 °C
or less as measured with the water temperature
gauge).
Ф Check (to see) that cooling water in the reserve
tank is within the range of FU LL - LOW.
© When it is below the low limit, supply (additional)
water immediately.
® Normally, only the water level of the reserve tank
needs to be checked.
But, the radiator cap should be opened once a
week to check that water is full in the radiator.
[Note]
When closing the radiator cap after water level is
checked or water is supplied, turn the cap fully
clockwise so that it can be firmly tightened.
Otherwise, cooling water is evaporated which results
in serious damage to the engine.
(2) Check on engine cooling water
(Read the instruction manual for the engine furnished separately.)
normal
-
36
-
