2 - 4 Use of switches and controllers
Switches
Functions:
(D Stop
This switch should be set in this position unless the
machine is in operation. The key can be inserted or pulled
out in this position.
© Run
This switch should be set in this position when the
machine is in operation.
© Start
This is the position to start the engine. When your hand is
released from the key after starting, it is automatically set
in the position of "RUN”.
© Preheat
This is the position to start the engine when the air
temperature is low. Set the switch in this position until
the preheat lamp becomes red heated, and then set it in the
start position.
(2)ThrottIe handle {Speed Control Handle)
Turn the handle toward the "HIGH" side to increase the speed
and toward the "LOW" side to decrease it.
-
19
-
(l)Starter switch
